Carel Digistat Thermostat (requires probe)

The Carel TW thermostat simultaneously displays set point, differential and temperature on its backlit Liquid Crystal Display.

The TW allows you to select the set-point range within a minimum and a maximum value, the status of the output relay (ON/OFF) in the event of probe failure, the heating/cooling mode and the position of the differential as PRE or POST of the set point.  

• S90 TW: Electronic Thermostats for Wall Mounting.
• OPERATING RANGE - 40°C to 90ºC ( 40°F to 194ºF)
• DISPLAY - 3 digits with decimal point plus sign.
• ACCURACY - Better than 1ºC (2ºF)
• INPUT - Carel NTC probe.
• OUTPUT - SPDT relay 240Vac/5A, 24Vac/10A rse. Output for alarm signal.
• CONNECTIONS - Screw terminal block for cables up to 2,5mm
• MOUNTING - Wall-mounted.
• DIMENSIONS - Front panel 85mm x 87mm, depth 48mm (3.3" x 3.4" x 1.92").
• POWER SUPPLY - 220/240Vac, +10%, 50/60Hz power consumption: 3VA.
• OPERATING CONDITIONS - Operating temperature: 0 - 50ºC humidity: lower than 90%rH, non-condensing.
• STORAGE CONDITIONS - Temperature: - 10 - 70ºC humidity: lower than 90%rH, non-condensing.
• INDEX OF PROTECTION - IP20.