The Dolphin range of pumps are a self priming, high quality Koi pond pump of the highest reliability.
The complete range of units are both silent in running and designed for continuous running applications.
Furthermore, the Dolphin M-range can also be used for pond cleaning where hoovering the pond or pool bottom is desired.
The body of the pump is constructed of polypropylene with a removable pre-filter basket for pump and impellor protection. The main shaft of the pump is manufactured from stainless steel 416 grade and the main seal is NBR type, which denotes that it is also suitable for seawater use.
The electrical safety side of the pump meets IP-55 standards. The pump motors on single-phase units are protected with a thermal overload protection device for additional reliability and further pump protection.
The pumps must be installed on a firm flat surface with a solid foundation, with the pump shaft running in a horizontal position. If installed outside, the pump must be further protected from the weather. Detailed installation instructions are contained within the pump's instruction manual.
Prior to the initial start up of the pump motor, ensure that the basket is primed with water and is clearly visible at the top of the transparent lid.
This is a self priming pump, complete with a removable protection basket. This Water pump has the output of 1.0hp with an economical running consumption of just 750watts @p1 rating. Whisper quiet running and extremely reliable for continuous pond use. Thermal overload protection. Inlet and outlet 1.5” bsp. Stainless steel drive shaft and NBR seals which can be suitable for seawater applications. Waterproof to IP-55 standards
